Hardly is the issue of safety ever discussed when it comes to the little innocuous light bulb socket. However, those in the know, such as yours truly, are here to tell you that there is quite a bit you might not know about.
It is not advisable to leave a lightbulb socket empty if it is avoidable. The main risks posed by an exposed lightbulb socket are electrocution and electrical fires. The former could severely injure, or even kill an individual because of the high voltage. The bare socket may also be negatively affected by various bits of debris, leading to sparks or worse.
Join us as we explore why it’s probably not a good idea to leave the lightbulb socket vacant. We also discuss what you can do if you are unwilling or unable to replace a dead lightbulb. There are also some cool little tools that can be used to mitigate any potential disaster from brewing in exposed bulb sockets. Let’s get right to it.
Is It Safe To Leave A Light Bulb Socket Empty?
There are many scenarios where a lightbulb socket may be left empty in a building. Maybe it’s a freshly finished construction where bulbs are yet to be installed. Or perhaps it’s a spare room from which a bulb has been borrowed and taken to a more frequently used part of the home. Whatever the scenario, it is important for one to fully understand the potential consequences of vacating the bulb socket.
With regards to the question at hand, no…it is NOT safe to leave a lightbulb socket empty. I know we’ve all done it and have mostly gotten away with it, but that does not make the risks any less real.
First, let’s take a quick physics lesson. Your house or building’s electrical wiring is a circuit, with multiple openings such as wall outlets and lightbulb sockets dotted along it. In the case of lightbulb sockets, specifically, installing a lightbulb closes these openings and completes the circuit. When the light switch is on, electricity is sent to the socket, which has connection points that transfer power to the lightbulb.
Now here comes the trouble. An open circuit point is an electrocution hazard for people and animals. Stick your finger in there and you will learn first-hand what it feels like to complete a circuit.
Of course, most light sockets are out of reach (on ceilings and high up on walls) but desk lamps, for instance, are not. A lightbulb socket is capable of dishing out nearly 250 volts of juice, enough to seriously injure, or even kill an adult person. One shudders to think of what would happen if a child toddled his or her way into an open office and towards an open-socketed desk lamp.
The above scenarios are undoubtedly under the “worst-case” tag but you never know. What we do know is that the risk of fatality from electrocution depends on other factors beyond just voltage. Duration of contact and amperage are just some of the other factors.
Besides electrocution, there is the threat of electrical fires if sparks are ignited at the contact points in the socket. Various bits of debris and dust floating in the air can drift into the socket and make contact with the…er, contacts.
Lint from your laundry room or even insects can land on the contacts and ignite sparks. With our reliance on gas systems for cooking and heating these days, a little leak is all that is needed to complete a recipe for disaster.
Insects can even catch fire and drop onto some other flammable material or substance, initiating a series of horrible events that may lead to a lost house or building. Fat chance, you say? I agree with you there. However, I have watched enough Final Destination films to know better, and I’d advise you to do the same.
Is It Safe To Leave A Light Bulb Partially Unscrewed?
If you’re anything like me, you hate the sight of a bulb-less socket. Many people might want to keep a bulb in its socket for aesthetics, while they wait for the day they finally remember to get a new lightbulb. However, the more environmentally conscious among us might be worried that leaving the bulb in place might lead to wasted electricity.
Firstly, a dead bulb does not use up any electricity (for reasons which will be discussed a bit later). Secondly, if you are unsure, you can always partially unscrew your lightbulb and completely separate it from the socket’s contacts while keeping it in place for the look. In fact, not only is doing this completely safe, but it is also encouraged for one particularly important reason. As we discovered above, leaving the bulb socket empty can be risky because of what may land on the contacts. Leaving the bulb in, even by a little bit, will shield the sockets from any foreign objects and bugs.
Is It Safe To Leave A Light On Without A Bulb?
It is absolutely not safe to leave a light switch on with no bulb in the socket. As much as we have addressed the potential perils of an open socket, the situation is only made dangerous by one thing: the light switch.
While the whole “your wiring is a circuit” thing is true, our light sockets are simply just a part of the physical infrastructure that allows electricity to flow and do its thing. Think of the circuit as a road and the light switch as the regulator that governs the entry of traffic (electricity) onto it.
If you were to touch the socket’s contacts with the light switched off, you would not be electrocuted. The story would be the opposite if the light switch was set to “on”. Naturally, we strongly advise against touching bulb socket contacts, regardless of where the light switch is positioned.
Does An Empty Light Socket Use Electricity?
When light is switched on, electricity is sent through the circuit and to the socket contacts for transmission to the lightbulb. If a working bulb is ready and waiting, it will use the power to light up. However, if the socket is empty, the electricity will not be used up. The socket itself does not use electricity, as it is just a relay device within the circuit.
One thing we must continually reiterate is the issue of safety. Although an empty socket does not use up electricity, there are risks involved with keeping an exposed lightbulb socket. What’s a lower electric bill compared to a burnt down house?
Light Socket Safety Cap
Besides dead or partially unscrewed lightbulbs, there are a few ways to fill an empty socket. A common and inexpensive solution is the ever-reliable electrical tape. A few strips usually get the job done and you never have to worry about the socket again until you want to install another bulb.
While I love electrical tape as much as the next guy, I’m sure that there are people who would prefer something a bit more…visually pleasing. Something like a socket safety cap.
These little tools are very useful for ensuring that your light sockets (and your property) are protected. As the name suggests, safety caps are small caps that are screwed into the light socket. Usually made from non-metallic materials (for obvious reasons), they protect from debris and bugs while looking sleek and stylish. A far cry from a mesh of electrical tape.
Many brands have run wild with this idea of socket safety caps, and the result has been an incredible selection of interesting designs and features. Head to your local hardware store or check out Amazon.com for some great deals.
One standout that cannot be ignored in this arena is the GE Polarized Handy Plug Convert. This little piece of electrical equipment offers fantastic protection thanks to its smooth plastic design.
Its key feature though is undoubtedly the polarized outlets on its face. This allows you to use your light socket as an outlet to power your tools and devices. These safety caps come in 2, 4, and 10-packs, allowing you to shield and utilize as many bulb sockets as you wish.
The Handy Plug is so easy to install, you could do it blindfolded. Simply ensure that your light switch is set to off, remove the existing or dead bulb (if any), screw in the cap and you’re all set. A must-have for rooms that may not have built-in wall outlets.